Tips for specification of an optimum power source when using micro

 MP units can receive power from a wide type of power sources. Commonly used are:

Uni-directional Power Supplies (standard bench power supplies, tethers, etc).

When using uni-directional power supplies, 

to prevent damage to the power source or ESC from regenerative power.

If the device detects it is being powered over USB only drive will be locked out. This may be falsely triggered on systems with precharge circuitry, this behavior can be disabled by setting the 'USB Power Lockout' setting to false.

Mounting and Cooling

Power Supply

model_name

Drive Modes

Drive Topology

Regenerative Power (AFW)

Stopping Behavior

Drive Tuning

Propeller Parking

Motor Drive

microDRIVE MP

Getting Started

Wiring the Unit

Integration

CAN Bus Signalling

Serial (DShot/PWM) Signalling

Input Priority System

Flight Controller Passthrough

Communications

Protection Systems

Secondary Arming Switch

Motor Starting Beep

Watchdog

Require Zero Throttle

Signal Timeout

Startup Hardware Checks

Safety and Protections

VTOL/Prop Parking

Using Fallback Signalling

Helicopters

Disabling Protections

Motor Temperature Sensing

Application Guide

Indicators Settings

Motor Drive Settings

Protection Systems Settings

Logging Settings

CAN Bus Settings

Communication Settings

Telemetry Settings

Prop Parking Settings

RPM Mode Settings

Settings

DroneCAN Telemetry

ARINC 825 Telemetry

Serial Telemetry

Telemetry

Status LED

Status Beeps

Indicators

Data Logging

Errors

Diagnostics

Troubleshooting

Change Log