Optional hardware checks can be performed on start-up to verify the hardware of the power switching bridge (MOSFETs and gate drivers) during power-up. It can detect shorted components or unsafe conditions before motor operation begins.

Signal Timeout

Startup Hardware Checks

model_name

Using Fallback Signalling

Disabling Protections

Motor Temperature Sensing

Application Guide

nanoDRIVE 4LPi

Getting Started

Wiring the Unit

Mounting and Cooling

Power Supply

BEC Considerations

Integration

Drive Modes

Drive Topology

Regenerative Power (AFW)

Brake On Stop

Drive Tuning

Motor Drive

CAN Bus Signalling

Serial (DShot/PWM) Signalling

Input Priority System

Communications

Protection Systems

Secondary Arming Switch

Motor Starting Beep

Watchdog

Require Zero Throttle

Safety and Protections

Indicators Settings

Motor Drive Settings

Protection Systems Settings

CAN Bus Settings

Communication Settings

Telemetry Settings

RPM Mode Settings

Settings

DroneCAN Telemetry

Serial Telemetry

Telemetry

Status LED

Status Beeps

Indicators

Errors

Diagnostics

Troubleshooting

Change Log